What is the difference between Phunnel and Killer bowls?
Published:
The base design of a bowl directly determines the airflow, how the heat reaches the flavor mix and how clean the set stays. Most bowls on the market use one of two designs: Phunnel and Killer.
Phunnel bowl
A Phunnel bowl has a single central hole in the base of the chamber. This hole rises about 10 mm from the base and forms a circular well around it; the flavor mix is placed up to the level of this raised hole.
- Easy airflow: When the bowl is filled, the raised central hole stays open, so the draw is easy and smooth.
- No clogging: No bits fall from the bowl into the stem pipe or the diffuser, so the pipe does not clog.
- Clean set: Juice that drains from the flavor mix stays in the well; it does not run into the set or the base, which makes cleaning easier.
- Balanced heat: Used with a heat management device (HMD) or foil. Because there is no flavor mix over the central hole, more air passes through with each draw; the result is a softer, more balanced draw.
Killer bowl
A Killer (classic) bowl has between 4 and 7 holes in the base of the chamber. The flavor mix should be placed loosely, without packing, as if sprinkling salt, so that it sits 2–3 mm below the top rim of the bowl; when filling is finished, the holes in the base should not be visible.
- Careful filling: For an easy draw, the flavor mix must not block the holes in the base; a bowl screen is recommended to keep the airflow open.
- Denser draw: Because air passes straight through the flavor mix to the holes below, the draw feels denser and fuller than with Phunnel models.
- More frequent cleaning: Because the holes are in the base, juice can run down into the stem pipe; sets used with Killer bowls need cleaning more often.
Which one you choose depends on the draw density you expect and your cleaning habits. To weigh this together with the choice of material, see our article Which hookah bowl should I buy?
