Free Shipping Over 3000 TL

Is your hookah set leaking air? How to tell

Published:

An air leak is the most common problem that reduces a set's efficiency. In a leaking set, outside air gets in with each draw; the bowl does not heat evenly and the draw weakens. Always check your set before you start using it.

Where do leaks occur?

  • Base opening: On push-fit (gasketed) bases, air leaks when the gasket wears or the base opening is uneven. On threaded bases, the thread may not be fully seated.
  • Bowl seat: Air gets in when the gasket between the bowl and the stem ages or the bowl is not fully seated.
  • Hose port: A leak occurs when the hose is not fully seated in the stem's hose port or the gasket in the port is worn.
  • Purge valve: When the ball or gasket in the valve gets dirty or comes out of place, the valve does not close fully.

How to test

Put water in the base, assemble the set and cover the top of the empty bowl with your palm. Then draw through the hose: if the set does not leak, the draw stops completely within a few seconds. If you can keep drawing, air is getting in somewhere; check the gaskets and connections one by one.

Solution

  • Replace worn base, bowl and hose gaskets; gaskets harden and lose their elasticity over time.
  • Keep the connections clean and dry; limescale and dirt stop the gaskets from seating properly.
  • Instead of push-fit bases with an uneven opening, choose a threaded base or one with an even opening.

Correct filling also affects the draw

Even if your set does not leak, packing the flavor mix in the bowl narrows the airflow. Place the flavor mix loosely and airily, as if sprinkling salt; this lets the air circulate freely and makes the draw easier.