Which hookah bowl should I buy?
Published:
Clay, earthenware, stone, ceramic, silicone, glass and metal bowls are available on the market. Once you have decided on the material, the second question follows: Phunnel or Killer?
Together with the right set and charcoal, the key to good use is heat management: the bowl needs to reach the required heat within the first 1–2 minutes and then keep that heat steady. If the bowl and the heat management device (HMD) are not chosen correctly, you will have to keep adjusting the coals with tongs. This is how the materials behave with heat:
Heat performance by material
- Earthenware, clay and stone bowls (the most popular): Just as a stone oven holds its heat, the thicker, heavier and harder these bowls are, the better they trap heat and the longer they hold it. Even as the coals get smaller, the bowl keeps transferring heat; because it heats up gradually, the risk of burning the flavor mix is low. Available glazed and unglazed, these are the most widely preferred bowls in the world.
- Ceramic bowls: Usually thin with a tall profile. They heat up quickly and transfer heat quickly, but cool down just as fast. 2 coals are enough at the start and excessive heat should be avoided; the heat balance should be maintained with a lidded HMD.
- Silicone bowls: Silicone is an insulating material that can withstand up to about 300 °C and keeps the temperature inside the bowl steady for a long time. For the best results, use it with a lidded HMD.
- Glass bowls: Their thin walls make heat hard to control; even if the desired temperature is reached with a lidded HMD, the risk of burning the flavor mix and getting a bitter taste is high. QUASAR glass bowls are the exception to this rule: with a thick glass chamber and a thick silicone body, this bowl is sold as a set with its own lidded HMD. While the HMD keeps the heat balanced, the silicone body absorbs the excess heat; putting 2 coals on the HMD and waiting 5 minutes is enough.
- Metal bowls: Usually made of aluminum to avoid a metallic taste. Because they conduct heat very quickly, the inner temperature swings rapidly with the amount of charcoal, and coals have to be added and removed constantly. The risk of burning and a bitter taste is very high, especially with foil; for this reason we do not recommend metal bowls.
Choosing a model by usage habit
- If you change flavors often and want a soft draw: Choose glazed Phunnel or Quasar models. Silicone bowls sold as a set with a lidded HMD are also a good alternative.
- If you change flavors often and want a dense draw: Go for glazed Killer bowls; because the glazed surface does not absorb juice, the taste of the previous flavor does not mix with the new one.
- If you use a single flavor: A glazed bowl is not necessary. You can choose Killer for a dense draw, or Phunnel for soft, easy airflow. Using a separate unglazed bowl for each flavor is the most professional approach.
We cover glaze in detail in our article Glazed or unglazed bowl?
